ABB Ability - Wi-Fi Specifications

6
ABB ABILITY
TM
EDGE INDUSTRIAL GATEWAY
36
—
6.1 Wi-Fi
The ABB Ability™ Edge Industrial Gateway provides the following Wi-Fi function:
2.5 GHz Wi-Fi 802.11a,b,g,n / 5 GHz Wi-Fi 802.11a,b,g,n.
The antennas connectors are placed on the front side.
6.1.1 Wi-Fi specifications
• Integrated 2.4 & 5G GHz Power Amplifier (PA) for WLAN solution.
• WLAN Baseband Processor and RF transceiver Supporting IEEE Std 802.11a/b/g/n.
• WLAN 2.4/5 GHz SISO (20/40 MHz channels).
• Baseband Processor.
• IEEE Std 802.11a/b/g/n data rates and IEEE Std 802.11n data rates with 20 or 40 MHz SISO.
• Fully calibrated system. Production calibration not required.
• Medium Access Controller (MAC).
• Embedded ARM™ Central Processing Unit (CPU).
• Hardware-Based Encryption/Decryption using 64-, 128-, and 256-Bit WEP, TKIP or AES Keys.
• Supports requirements for Wi-Fi Protected Access (WPA and WPA2.0) and IEEE Std.
• 802.11i (includes hardware-accelerated Advanced Encryption Standard (AES)).
• Designed to work with IEEE Std 802.1x.
• IEEE Std 802.11d,e,h,i,k,r PICS compliant.
• New advanced co-existence scheme with BT/BLE.
• 2.4/5 GHz Radio.
• Internal LNA and PA.
• Supports: IEEE Std 802.11a, 802.11b, 802.11g and 802.11n.
• Supports 4 bit SDIO host interface, including high speed (HS) and V3 modes.
2.4 GHZ TX output power
Maximum RMS output power measured at 1dB from IEEE spectral mask or EVM.
5 GHZ TX output power
Maximum RMS output power measured at 1dB from IEEE spectral mask or EVM.
—
Interfaces in detail
Parameter Value
Operation frequency range

Output Power 
Parameter Value
Operation frequency range

Output Power 