ABB Ability - Internal Cellular Modem Details

ABB ABILITY
TM
EDGE INDUSTRIAL GATEWAY
37
6
—
6.2 Internal cellular modem
(only for ABB Ability™ Edge Industrial Gateway with 3G with cellular
connectivity)
The ABB Ability™ Edge Industrial Gateway supports the following Telit LE910 modem variants,
according to product versions based on the geographic area of usage:
The antennas connectors are placed on the front side.
6.2.1 Internal cellular modem specifications
(according to product versions)
Product features
• Rx Diversity and MIMO DL 2x2.
• LTE FDD Cat.1, 3GPP compliant.
• Built in UDP/TCP/FTP/SMTP stack.
LTE Data
• Uplink up to 5 Mbps.
• Downlink up to 10 Mbps.
Supported RF Bands
TX output power

6.2.2 LTE - single antenna operation notes
Single LTE antenna operation can be supported; however, typically, wireless carriers (Mobile Network
Operators) impose restrictions. Please consult with your carrier before considering single LTE antenna usage.
For optimum performance of the cellular interface, ABB recommends the use of both CELL MAIN and
CELL DIV antenna connectors.
6.2.3 Main antenna requirements
Telit LE910C1-EU - Europe version
Version Modem variant Technology
  
  
TELIT LE910 variant Technology 4G bands 3G bands 2G bands

   –
    
Feature Value
Frequency range
Depending by the frequency band(s) provided by the network operator
Bands See "Supported RF Bands" on the previous page
Impedance 
Input power


VSWR absolute max 
VSWR recommended 