ABB Ability - Gateway Configuration Parameters

ABB ABILITY
TM
EDGE INDUSTRIAL GATEWAY
91
15
15
After clicking "Start Discovery":
• If automatic discovery is selected, the auto-scan process starts with visual feedback of the status
(like on gateway discovery for provisioning).
• If manual discovery is selected, a dialog with the network scanning options pops up .
—
15.2 Configuration
After discover, device can be selected and configuration page is opened
The configuration page contains the following elements:
• Time parameters (manual).
• NTP parameters (automatic clock syncronization).
• Maintenance Access.
• Owner Details.
• change owner or reset password.