3. Select “S500 I/O modules”.
4. Select “DA501” module.
5. Select [Add object] to add the module to the I/O bus.
1.5.3.2 DA501 variable mapping
1. Double-click “DA501” in the device tree.
ð
A tab opens in the editor view.
2. Select “DA501 I/O Mapping”
ð
Here, you will map variable names (symbols) for the channels you will need in the
program.
Getting started with example projects
Example project for central I/O expansion > Configure the I/O module
2023/03/033ADR010649, 3, en_US18
To Next Page
Loading...
