1.5.2.3 Save the project
Select menu “File è Save Project”.
Alternatively, select the save icon in the tool bar.
Alternatively, press [Ctrl] + [S].
1.5.3 Configure the I/O module
● The types and order of modules in the Automation Builder project must match the real
hardware configuration.
● The position of the modules in the device tree can be changed by drag and drop.
1.5.3.1 Add an I/O bus module
1. Right-click “IO_Bus” in the device tree.
2. Select “Add object”.
Getting started with example projects
Example project for central I/O expansion > Configure the I/O module
2023/03/03 3ADR010649, 3, en_US 17
To Next Page
Loading...
