CPU and PC are connected with an Ethernet cable.
1. In the Automation Builder device tree right-click “PLC_AC500_V2”.
2. Select “Communication Settings”.
3. Keep the default value in the IP address of the CPU or type in the current IP address, if
differs.
The standard (default) IP address of the port ETH1 is: 192.168.0.10
The standard (default) IP address of the port ETH2 is: 192.168.1.10
Setting up the
communication
gateway
Getting started with example projects
Example project for central I/O expansion > Setting up the communication gateway
2023/03/03 3ADR010649, 3, en_US 33
To Next Page
Loading...
