ABB AC500 V2 - Page 40

1.5.8.1 Starting the IEC 61131 programm editor CODESYS
To start the IEC 61131 programm editor CODESYS:
Open an AC500 V2 project in Automation Builder
In the Automation Builder device tree double-click “Application”
ð
This will start the IEC 61131 programm editor CODESYS
1.5.8.2 Insert visualization object
1. In the CODESYS menu select “Visualization”
2. Right-click Visualizations.
3. Select “Add object”.
Getting started with example projects
Example project for central I/O expansion > Set-up visualization
2023/03/033ADR010649, 3, en_US40