5. Under “Content” type in "Start drilling condition"
6. Under Category select “Colors”.
7. Under “Color” enable “No color inside” and “No frame color” this will help create a cleaner
look later on
8. Select [OK] to implement changes.
1.5.8.5 Further lines and labels
1. In the CODESYS editor toolbox select “Polyline”
2. Create a line by left-clicking and holding the mouse button. Drag the line to your desired
lenght then double-click to end the line.
Getting started with example projects
Example project for central I/O expansion > Set-up visualization
2023/03/033ADR010649, 3, en_US44
To Next Page
Loading...
