2. Select “CM579-PNIO Parameters”.
3. Select “Information”.
ð
This page contains general information about the CM579-PNIO.
4. For the example project, you can keep the default settings.
1.6.2.3 Set-up the PROFINET IO controller
To edit settings for the controller, you must not be logged-in to the PLC.
1. Under “CM579_PNIO”, double-click “PNIO_Controller” in the device tree.
ð
A tab opens in the editor view.
2. Select “PROFINET IO CONTROLLER”
Getting started with example projects
Example project for remote I/O expansion with PROFINET > Set-up PROFINET controller
2023/03/033ADR010649, 3, en_US54
To Next Page
Loading...
