1.6.4.2 Create POU logic
1. In the CODESYS editor device tree double-click “_30_PNIO_test”
2. Select “Assign” from Tools.
3. Select “???” on the left side of the assignment, press [F2].
4. Select “Global Variables”.
5. In “CI502_IO_Module_Mapping” list, select “xDI_08_CI502_I5”.
6. Select [OK] to add this variable to the left side of the assignment connector.
7. Select “???” on the right side of the assignment, then press [F2].
8. In “CI502_IO_Module_Mapping” list” , select “xDO_08_CI502”.
Getting started with example projects
Example project for remote I/O expansion with PROFINET > Add remote I/O expansion to project
2023/03/033ADR010649, 3, en_US60
To Next Page
Loading...
