87 ACS2000 AFE 2MVA UM 3BHS355653 ZAB E01 REV. H
6.1 Safety
Hazardous voltage!
Improper work could lead to life-threatening injury
or death.
The electrical installation must be carried out by
qualified personnel according to the site and
equipment requirements, and the relevant
electrical codes.
When the electrical installation is completed, the
main and auxiliary power supply to the drive must
not be switched on without the consent of the ABB
commissioning personnel.
Take appropriate measures to prevent main and
auxiliary power supply being switched on during
installation.
To Next Page
Loading...
