To Next PageTo Next Page
Need help?Do you have a question about the ABB ACS2000 AFE 2MVA and is the answer not in the manual?
Details the safety and protection standards and requirements for the MCB.
Specifies the minimum requirements for the main circuit breaker and its control system.
Outlines general safety practices to maintain safety and minimize hazards.
Emphasizes that the drive must be handled by skilled and experienced personnel.
States that installation work must be carried out by qualified personnel.
Warns about hazardous voltages and emphasizes the need for qualified personnel.
States that commissioning must be done by ABB certified personnel.
Advises obtaining commissioning procedures from ABB and requests customer assistance.
Lists detailed mechanical, electrical, MCB, transformer, motor, insulation, and power supply checks.
Stresses that the drive must only be operated by qualified and authorized personnel.
Describes the functions and components of the local operator panel.
Lists the status messages indicating the main operating states of the drive.
Illustrates sequences for starting, stopping, and emergency shut-down of the drive.
Details the procedure for starting and stopping the drive locally and from remote.
Describes the function and procedure for performing an emergency shut-down.
Introduces the CDP control panel, its display, keypad, and core functions.
Describes how to monitor drive values and view fault history.
Details how to configure and set up the drive using parameters.
Covers selecting drive control location and switching between local/remote modes.
Covers commands for setting direction of rotation and entering reference values.
Describes how the drive indicates and logs alarms and faults.
Details fault classification, handling procedures, and troubleshooting steps.
Details procedures for de-energizing the drive, checking connections, and replacing components.
Details the procedure for replacing phase modules, including their location and dimensions.
General
