Need help?Do you have a question about the ABB ACS310 and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| IP Rating | IP20 |
| Control Method | Scalar control |
| EMC Filter | Built-in |
| Supply Voltage | 200 to 240 V, 380 to 480 V |
Explains caution symbols for serious injury, death, or equipment damage and how to avoid danger.
Provides safety instructions for working on the drive, motor cable, or motor, emphasizing qualified electricians.
Overviews drive connections, including I/O, and how they are parameterable.
Provides instructions for installing the drive using screws or on a DIN rail, emphasizing dust prevention.
Instructs on installing a hand-operated disconnecting device for safety during installation and maintenance.
Presents connection diagrams for power cables, including PE conductor grounding and 1-phase supply connections.
Details I/O terminals, voltage/current selection for analog inputs, and PNP/NPN configurations.
A comprehensive checklist to verify mechanical and electrical installation aspects before drive start-up.
Outlines the general procedure for starting up the drive, emphasizing safety and de-coupling the driven machine.
Describes the features of the basic control panel, including its LCD display and copy function.
Details the features of the assistant control panel, including its alphanumeric display and start-up assistant.
Explains how the start-up assistant guides users through essential drive setup tasks and parameter entry.
Guides on configuring communication parameters for fieldbus control using Modbus RTU.
Explains the methods for resetting faults, including keypad, digital input, fieldbus, and power cycling.
Lists alarm codes, their causes, and recommended actions for troubleshooting drive status.
Provides drive ratings, including input current, output characteristics, and frame sizes.
To Next Page
