262 Actual signals and parameters
5323 MDB DATA
OUT 1
Modbus register 40080 (write-only).
Supported only by STD MODBUS.
0
0...9999 Parameter index 1 = 1
5324 MDB DATA
OUT 2
Modbus register 40081 (write-only).
Supported only by STD MODBUS.
0
0...9999 Parameter index 1 = 1
5325 MDB DATA
OUT 3
Modbus register 40082 (write-only).
Supported only by STD MODBUS.
0
0...9999 Parameter index 1 = 1
5326 MDB DATA
OUT 4
Modbus register 40083 (write-only).
Supported only by STD MODBUS.
0
0...9999 Parameter index 1 = 1
5327 MDB DATA
OUT 5
Modbus register 40084 (write-only).
Supported only by STD MODBUS.
0
0...9999 Parameter index 1 = 1
5328 MDB DATA
OUT 6
Modbus register 40085 (write-only).
Supported only by STD MODBUS.
0
0...9999 Parameter index 1 = 1
5329 MDB DATA
OUT 7
Modbus register 40086 (write-only).
Supported only by STD MODBUS.
0
0...9999 Parameter index 1 = 1
5330 MDB DATA
OUT 8
Modbus register 40087 (write-only).
Supported only by STD MODBUS.
0
0...9999 Parameter index 1 = 1
5331 MDB DATA
OUT 9
Modbus register 40088 (write-only).
Supported only by STD MODBUS.
0
0...9999 Parameter index 1 = 1
5332 MDB DATA
OUT 10
Modbus register 40089 (write-only).
Supported only by STD MODBUS.
0
0...9999 Parameter index 1 = 1
64 LOAD
ANALYZER
Load analyzing function for peak value and amplitude. See
section Load analyzer on page 153.
6401 PVL SIGNAL Defines the signal logged for peak value 103
x…x Parameter index in group 01 OPERATING DATA. Eg 102 =
0102 SPEED.
1 = 1
6402 PVL FILTER
TIME
Defines the filter time for peak value logging 0.1 s
0.0…120.0 s Filter time 1 = 0.1 s
6403 LOGGERS
RESET
Defines the source for the reset of the peak value logger
and amplitude logger 2. Resetting always resets both
loggers.
NOT SEL
NOT SEL No reset selected 0
DI1 Reset loggers on the rising edge of DI1. 1
All parameters
No. Name/Value Description Def/FbEq
To Next Page
Loading...
