ABB ACS2000 AFE 2MVA - Cable Entries

CHAPTER 6 – ELECTRICAL INSTALLATION 96
—
6.8 Cable entries
The drive is prepared for top or bottom cable entry with one or a
combination of the following cable entries:
• Cable entry with EMC plates
• Cable entry with sealing modules, type 1
6.8.1 Cable entry with EMC plates
Usage
Power cables, ground cables, bonding conductors
Auxiliary power cables, control cables
Included in delivery
Galvanized plate with net-like EMC sleeves (1) and
sealing grommets (2)
EMC cushions (1) on the underside of the EMC
plate if the cable entry is used for control cables.
6.8.2 Cable entry with sealing modules, type 1
Usage
Power cables, ground cables, bonding conductors
Included in delivery
Cable entry frame (1)
Not included in delivery
Sealing modules (2), accessories, tools
6.8.3 Cable entry with sealing modules, type 2
Usage
Auxiliary power cables, control cables
Included in delivery
Frame (1), EMC sealing inserts (2)
Supplier
Roxtec AB (
www.roxtec.com )
Not included in delivery
Installation tools and accessories
!
For further information, eg, location and
dimensions, see the applicable Mechani-
cal drawings.
Example
45 mm
1.5 mm
1
2
1
Example
1
2
2
1
2