ABB ACS2000 AFE 2MVA - Function Mode for Display Settings

147 ACS2000 AFE 2MVA UM 3BHS355653 ZAB E01 REV. H
—
9.7 Function mode
The functions mode is used to set the display contrast.
9.7.1 Overview
The function mode is used to set the display con-
trast.
Status line
Selectable functions
Selects the function mode
Selects the line
Acknowledges the selection
9.7.2 Adjusting the display contrast
1. To enter the function mode, press the FUNC
key.
2. To select the contrast adjustment function,
press the slow navigation keys until the blinking
cursor reaches the CONTRAST line.
3. To enter the contrast setting function, press
the ENTER key.
4. To change the contrast value, press a slow navi-
gation key.
5. To confirm the selection and to return to the
actual signals mode, press the ENTER key.
6. To cancel the setting and keep the original set-
ting, press any of the mode selection keys. The
selected keypad mode is entered.
1 L ->
0.0 rpm
UPLOAD
DOWNLOAD
<= <=
=> =>
4
CONTRAST
1
2
3
4
5
1
2
3
4
5
1 L ->
0.0 rpm
UPLOAD
DOWNLOAD
<= <=
=> =>
4
CONTRAST
1 L ->
0.0 rpm
UPLOAD
DOWNLOAD
<= <=
=> =>
4
CONTRAST
1 L ->
0.0 rpm
CONTRAST
[4]
1 L ->
0.0 rpm
CONTRAST
[6]
1 L ->
0.0 rpm
UPLOAD
DOWNLOAD
<= <=
=> =>
6
CONTRAST
1 L ->
0.0 rpm
UPLOAD
DOWNLOAD
<= <=
=> =>
6
CONTRAST