ABB ACS580 Series - Branch circuit protection; Fuses; Note: The UL listed drive fuses in the table are provided in the purchased product.; 208 Volt fuses for packaged drive

18 Supplemental Installation Manual for ACS580-0P
ACS580-0P
Branch circuit protection
Input power is connected to the ACS580 through a door interlocked disconnect
switch or circuit breaker. When connected to a 240V or 480V power source, the
ACS580 with the circuit breaker option is suitable for use on a circuit capable of
delivering not more than 100,000 RMS symmetrical amperes. When connected to a
600V power source, PC configurations are suitable for use on a circuit capable of
delivering not more than 10,000 RMS symmetrical amperes (75-150 HP), and not
more than 25,000 RMS symmetrical amperes (2-60 HP).
Fuses
Note: The UL listed drive fuses in the table are provided in the purchased product.
• Replacement fuses are required to be of the same class, current rating, and
voltage rating. Fuses from other manufacturers can be used if they are 600V
rated and meet the specifications given in the table.
• Fuses with higher current rating than specified must not be used.
208 Volt fuses for packaged drive
208 Volt
Nominal Output
Range
Base
Drive
Frame
Size
Internal Drive
Fuse Rating
External Fuse for
Disconnect Option
Type Code
1
Drive
Current
Packag
e Power
A HP Class
Current
Rating
Class
Max Current
Rating
ACS580-0P-04A6-2 4.6 1 R1 Class CC 15A N/A N/A
ACS580-0P-06A6-2 6.6 1.5 R1 Class CC 15A N/A N/A
ACS580-0P-07A5-2 7.5 2 R1 Class CC 15A N/A N/A
ACS580-0P-10A6-2 10.6 3 R1 Class CC 15A N/A N/A
ACS580-0P-017A-2 16.7 5 R1 Class CC 30A N/A N/A
ACS580-0P-024A-2 24.2 7.5 R2 Class CC 30A N/A N/A
ACS580-0P-031A-2 30.8 10 R2 Class T 40A N/A N/A
ACS580-0P-046A-2 46.2 15 R3 Class T 80A N/A N/A
ACS580-0P-059A-2 59.4 20 R3 Class T 80A N/A N/A
ACS580-0P-075A-2 74.8 25 R4 Class T 100A N/A N/A
ACH580-PxR-088A-2 88 30 R5 Class T 110A N/A N/A
ACH580-PxR-114A-2 114 40 R5 Class T 150A N/A N/A
ACH580-PxR-144A-2 143 50 R6 Class T 200A N/A N/A
ACH580-PxR-169A-2 169 60 R7 Class T 250A N/A N/A
ACH580-PxR-211A-2 211 75 R7 Class T 300A Class J or RK1 400A
ACH580-PxR-248A-2 248 100
2
R8 Class T 350A Class J or RK1 400A
1)
“0P” represents a disconnect and 0P+F255 represents a circuit breaker.
2) 100 HP @ 230V