ABB AMI Series - Page 137

Manual for Induction Motors and Generators
Commissioning Report - 122
3BFP 000 050 R0101 REV E
2 Storage
General:
Storage:
Storage time longer than 6 months:
Person responsible for storage:
Storage place:
Storage actions:
Transportation package is ventilated:
External heating/fan is used:
Machine space heaters are used:
Bearings are flushed:
Bearing shells are removed:
Shaft end anti-corrosion protection checked:
Shaft end anti-corrosion protection renewed:
The rotor is turned 10 revolutions every two
months:
There are vibrations in the storage place:
There are corrosive gases in the air:
Brushes are lifted up:
Machine documents are saved and protected
for future use:
Comments:
no yes,
begin:_______________end:_____________________
no yes
in packing case protected by a waterproof cover
Daily temperature: min/max._______ - _______ºC
Humidity:_______%
indoors outdoors
no yes
no yes,
type:______________________________________
no yes,
voltage:____________________________________
no yes,
oil type:____________________________________
no yes,
type:______________________________________
no yes
no yes
no yes,
location:_____________________________________
no yes,
__________mm/s, rms
no yes,
what kind of:__________________________________
no yes,
date:______________________________________
no yes,
date:______________________________________