16
…WIRELESS COMMUNICATIONS
Alarm Auto-Reports
This controls the sending of a report should any
one or more of these events occur:
• A sensor error
• A coil error
• A power supply error to the coil drive
• A battery alarm
If the Alarm Reporting (>402) has been enabled,
then on any of the above errors an immediate
alarm report is generated and sent via GSM to the
phone number referred to in Destination (>401).
This is provided that there has been no Alarm
Report sent out during the last 24 hours (i.e. no
alarm flag present) & more than 24 hours has
passed since start-up.
Regardless of the GSM Wake-up time, the GSM
module is triggered and the report is sent. If the
alarm flag is still present at the time of a scheduled
text auto-report, then the alarm field is appended
at the end of the Auto-Report, regardless of
whether it is already included in the ‘Command
String’.
If Alarm Reporting (>402) has been disabled , then
no report is generated.
To Next Page
Loading...
