…5 Installation
…Installation requirements
Pipeline support
The sensor must be installed without mechanical tension
(torsion, bending). If necessary, support the pipeline.
Supports
Figure 13 Pipeline support
Extremes of temperature
Do not install the sensor in a position that will expose it
to extremes of temperature (direct sunlight, frost, snow).
Provide appropriate weather protection where necessary.
Figure 14 Extremes of temperature / adverse environments
Seal materials / fluid temperatures
The flange seal material must be compatible with the fluid
and fluid temperatures.
–20 °C
(–4 °F)
m in.
70 °C
(158 °F)
max.
Figure 15 Within temperature limits
Pipeline forces / torque
The pipeline must not exert any forces and torques on the
sensor (for example, vibration).
Figure 16 Vibration
Spillage onto the sensor
Do not install the sensor in an area where a spillage of any
substance could damage the sensor.
Figure 17
Spillage
To Next Page
Loading...
