Introduction to the manual
Contents of this chapter
This chapter gives basic information on the manual.
Safety instructions
Follow all safety instructions delivered with the drive before you install, commission, or use
the drive. For single drives, the safety instructions are given at the beginning of the hardware
manual. For the safety instructions of air-cooled units, see ACS880 multidrive cabinets and
modules safety instructions (3AUA0000102301 [English]). For the safety instructions of
liquid-cooled units, see Safety instructions for ACS880 liquid-cooled multidrive cabinets and
modules (3AXD50000048633 [English]).
WARNING!
Note that BAMU-12C auxiliary measurement unit is used for measuring main circuit
voltage. Main voltage can be present even if auxiliary circuit voltages are switched
off.
1
Introduction to the manual 7
To Next Page
Loading...
