ABB CP600 - Page 13

Operating Instructions 12
CP600/Issue: 09.2011
44
<tmz en>0</tmz en>
45
<mem ramdisk kb>0</mem ramdisk kb>
46
<mem heap1 kb>0</mem heap1 kb>
47
<mem heap2 kb>0</mem heap2 kb>
48
<mem heap3 kb>0</mem heap3 kb>
49
<mem lrheap kb>0</mem lrheap kb>
50
<mfc http en>1</mfc http en>
51
<mfc http cache>1</mfc http cache >
52
<http version>0</http version>
53
<shift hotkeys en>1</shift hotkeys en>
54
<perco file>uBrowsCo.xml</perco file>
55
<storage path></storage path>
56
<built in dialog>0</built in dialog>
57
<scale factor>1</scale factor>
58
<export en>1</export en>
59
<export path>C:\temp\Files</export path>
60
</uBrowser>
<version> Version
Version of the configuration file. DO NOT MODIFY IT!
<start_page> Start Page
Start URL, to open either a local file or remote file:
 <start_page>Start.html</start_page> relative to the program path.
 <start_page>http://192.168.1.10/Start.html</start_page>
Default is “webvisu.htm”.
<log_file> Log File
The MicroBrowser is able to create a log file for debug purposes. This file will increase, until it reaches
1 MB. It is cleared each time you restart the program. See also <debug_level>.
Default is “uBrowser.log.txt”.
<proxy_host>, <proxy_port> Proxy
Both tags may contain the respective information. Leave the <proxy_host> empty, since these properties
are not yet supported.
<vpi_user>, <vpi_pass> VPI
These properties are only needed, if you plan to access a target system over internet, using VPI-Portal.
These properties contain username and password for the portal. Please contact iniNet for details.
<prompt_url> Registration Code
The license key is already available in the CP6xx-WEB Control Panel. There is no need to enter a regis-
tration code.