NoteAction
xx0800000190
In the Install GSD Files menu, select from
the directory and click Browse.
9
Note
Select the GSDML file from the Robot-
Ware DVD and click Install. Click Yes to
confirm the warning.
10
Click OK to complete the installation.11
Click Close.12
In the device list on the right-hand side of
the HW Config, expand PROFINET
IO\Additional Field Devices\Gener-
al\Fieldbus Adapter and select DSQC
688.
13
xx0800000193
Drag the DSQC 688 device to the industri-
al network.
14
Continues on next page
Application manual - PROFINET Anybus Device 31
3HAC050968-001 Revision: C
© Copyright 2008-2016 ABB. All rights reserved.
4 Configuring the anybus device
4.4.1 Configuring an external controller using Siemens Step7 PC tool
Continued
To Next Page
Loading...
