NoteAction
xx0800000197
Enter the same device name and IP ad-
dress as when naming the device in step
4.
Click Ethernet to enter the IP address and
make sure that Assign IP address via IO
controller is selected.
19
Click OK.20
On the Station menu, click Save and
Compile.
21
On the PLC menu, click Download.22
Application manual - PROFINET Anybus Device 33
3HAC050968-001 Revision: C
© Copyright 2008-2016 ABB. All rights reserved.
4 Configuring the anybus device
4.4.1 Configuring an external controller using Siemens Step7 PC tool
Continued
To Next Page
Loading...
