Electrical connections
OI/PME/LME/EAN823/EBN853/EBN861-EN 21
4.3 Cable guide in universal plug
Attention - Potential damage to cables and wires!
Damage due to improper installation.
Do not clamp individual wires under the clip.
Important (Notice)
To prevent interference from electromagnetic fields, the signal and power cables in the
connector housing must be routed and connected separately.
A metal divider separates the two cable areas inside the universal plug.
Fig. 11
1 Power cable
2 Signal cable
3 Shield
4 Separator
To Next Page
Loading...
