Alarms / Errors
34 OI/PME/LME/EAN823/EBN853/EBN861-EN
7 Alarms / Errors
7.1 Definition
7.1.1 Alarms
The actuator or electronic unit is in a critical state (e.g., high temperature), which currently does
not affect the actuator, electronic unit, process or persons. The actuator functions are available.
Previous alarms are stored in the "Saved Alarms" area in the electronic unit. Use the graphic
user interface to read out stored alarms.
7.1.2 Error
The actuator or electronic unit is in a critical state, e.g., positioning time-out, which currently is
impairing the actuator, electronic unit, process or persons. The actuator is switched off and the
actuator functions are no longer available. Previous error messages are stored in the "Saved
Errors" area in the electronic unit. Use the graphic user interface to output the stored errors.
Error messages cannot be reset until the cause of the error has been eliminated.
To Next Page
Loading...
