ABB HT557844 - Installing the Turbocharger

Operation Manual / 4 Product description / A150-M.. - A155-M..
2
Removing and Installing
Page 15 /
120
© Copyright 2017 ABB. All rights reserved.
HZTL4032_EN
Revision F
January 2017
2.3 Installing the turbocharger
2.3.1 Inserting gaskets
CAUTION
Inserting the gaskets
Gaskets that are forgotten, damaged or improperly inserted will lead to oil
leaks.
 Always use new gaskets and insert them carefully into the slot.
The necessary sealing is performed by O-rings which are located in the slots of the bearing
casing. The O-rings are supplied with the turbocharger.
Figure 9: Inserting the gasket
42001 Bearing casing 01 Oil supply
42200 O-ring 02 Oil drain
42195 O-ring