40 M1M 30 POWER METER USER MANUAL
SETPOINT
SETPOINT includes numerical value and magnitude. Different variables correspond to different
thresholds, magnitudes, and units, and you need to select variables before setting SETPOINT.
CONF ALM SETPOINT
After the number is set, it is needed to use Button “Up” and Button “Down” to adjust the magnitude.
HYSTERESIS
HYSTERESIS is a percentage value, and its setting range is 0%-50%.
CONF ALM HYSTERESIS
DELAY
DELAY is used to verify whether the variable value really exceeds the limit or is recovered, and its setting
range is 1-255s.
CONF ALM DELAY
To Next Page
Loading...
