41
M1M 30 POWER METER USER MANUAL
LOG
This parameter is used to set whether the alarm is stored or not.
CONF ALM LOG
If the alarm is configured as LOG, the alarm information will be stored in Flash when the alarm is
triggered. When the alarm is not viewed, ICON will always be displayed (even when restarted), and
the icon will disappear after the alarms have been checked.
PORT
Each alarm event can be connected with certain DO, and different alarms can be connected to the same
DO.
CONF ALM PORT
The optional DOs include DO1, DO2 and OFF.
Only the DOs configured as alarm output can appear in the list. For details, see “7.4.Input / output
(I/O)”.
To Next Page
Loading...
