Layout of EC Declaration of Conformity
The Manufacturer: (Name and address of the manufacturer)
hereby declares that
The Products: (Product identication)
are in conformity with the corresponding essential requirements of following EC directive:
Directive 2006/95/EC (of 12 December 2006).
The motors are in conformity with provisions of the harmonized standard EN 60 034-1(2010) which thus
comply with Principal Elements of the Safety Objectives for Electrical Equipment stated in Annex I of
said directive.
Note: When installing motors for converter supply applications, additional requirements must be
respected regarding the motor as well as the installation, as described in installation manual delivered
with converters.
Directive 2009/125/EC (of 21
st
October 2009).
The motors are in conformity with requirements set in the Regulation (EC) N° 640/2009
dated of 22 July 2009.
Efciency class is dened according to the standard EN 60034-30 : March 2009.
Year of CE marking :
Signed by
____________________________
Title ____________________________
Date ____________________________
2 ABB Motors and Generators | Low voltage motor manual 01-2009
To Next Page
Loading...
