Need help?Do you have a question about the ABB EC Titanium Series and is the answer not in the manual?
An overview of the EC Titanium manual, providing guidance for users.
Essential safety instructions for installation, operation, and servicing to prevent injury or damage.
Explains the product's type designation for specifications and configuration identification.
Details on identifying the motor and drive using information on the nameplate.
Provides electrical ratings and model numbers for standard EC Titanium products.
Guidance on selecting an appropriate site for installing the EC Titanium, considering clearance and environment.
Instructions on how to safely remove the drive cover for access to wiring connections.
Basic power wiring considerations for the EC Titanium motor and drive, including safety warnings.
Essential steps for proper grounding of the EC Titanium Integrated Motor and Drive for safety.
Details on connecting and configuring the remote panel for system setup and control.
Information on analog and digital signals for controlling the drive's functions.
Explains how to control the EC Titanium drive using the remote keypad in real-time.
Step-by-step guide to configure the EC Titanium for operation using terminal control.
Step-by-step guide to configure the EC Titanium for operation using keypad control.
Overview of how to access and change drive parameters using the remote keypad or PC tools.
Details on various terminal control configurations for operating the drive.
Explains keypad control configurations for drive operation, including MOP controls.
A list of essential parameters for the drive's initial setup and startup.
Comprehensive descriptions of all available drive parameters for detailed configuration.
Functionality to prevent unauthorized changes to drive parameter values.
How to find motor data from the nameplate for ABB drive setup.
Guide to setting up drive parameters based on EC Titanium motor nameplate data.
Configuration options for selecting the motor's start mode for FASR motors.
Technical specifications related to the drive's motor control capabilities and performance.
Information on the drive's maximum permissible continuous and overload output current.
How to identify and correct abnormal drive status indicated by alarms or fault messages.
A list of potential fault codes displayed by the drive module and their corrective actions.
A table mapping Modbus registers to control and status parameters for communication.
Details on the remote keypad option, including specifications and mounting.
To Next Page
General
