ABB M4M 30 - Date and Time; Type of Network

M4M 30 NETWORK ANALYZER USER MANUAL
27
6.3.Date and time
Setting date and time is mandatory in order to use the time-related functionalities on the device (e.g.
Historicals, Maximum, Minimum). Please notice that if no date and time are set, no timestamp will be
available on the measured data.
→ → Unit → Date/Time
Menu Description
Set date Configure the current date with format YYYY/MM/DD.
Set time Configure the current time.
6.4.Type of network
In order to configure the type of network it is needed to choose one of the available options according to
the installation conditions.
→ → Installation → Type of network
1. Scroll the list of fields
2. Select one option
According to the type of network that has been chosen, the parameters visualized on the device HMI
change.
Option Description Option Description
3Ph/4W/4CT 3-phase 4-wire + 4CTs 3Ph/3W/3CT 3-phase 3-wire + 3CTs
3Ph/4W/3CT 3-phase 4-wire + 3CTs 3Ph/3W/2CT 3-phase 3-wire + 2CTs
3Ph/4W/1CT 3-phase 4-wire + 1CT 2Ph/3W/2CT 2-phase 3-wire + 2CTs
3Ph/3W/1CT 3-phase 3-wire + 1CT 1Ph/2W/1CT 1-phase 2-wire + 1CT
2
1