52 M4M 30 NETWORK ANALYZER USER MANUAL
7.7.Tariffs
In this section it is possible to configure up to six tariffs to monitor consumption in different time
frames. It is possible to control activation via: clock, setting up to three input channels and settings sent
via bus.
→
→
Tariffs
Menu Description
Clock
Up to 6 tariffs can be defined according to specific timebands, driven by the
device Real Time Clock.
Input
Based on the number of I/O that are set as Tariff Inputs (from 1 to 3) that are
set up from the Input menu (please refer to chapter “7.4.Input / output”), 2, 4
or 6 tariffs can be activated.
Communication
It is possible control directly the activation of the individual tariffs. Multiple
configuration settings cannot be used.
To Next Page
Loading...
