M4M 30 NETWORK ANALYZER USER MANUAL
57
7.9.Other settings
In this menu it is possible to configure the time interval for average values calculation, timers settings,
energy conversion parameters.
→
→
Other settings
Menu Description
Average Configuration of time interval for Average values.
Timers Configuration of count-down timer and timer reset.
Energy conversion Configuration of conversion factors for energy.
Warning levels Configuration of warning level for single harmonics.
Average menu
In this menu it is possible to configure the time interval used for calculation of average parameters that
can be read out in Data reading -> Average. For the data reading of average values please refer to chapter
“8.4.Average”
For the configuration of demand values related to the flash memory, please refer to chapter
“7.3.Historicals”
→ → Other setting → Average
Setting Description
Time interval
Manual entry from 1 to 60m. Default: 15m
To Next Page
Loading...
