ABB M4M 30 - Page 33

M4M 30 NETWORK ANALYZER USER MANUAL
33
Reset menu
→ → Unit → Reset
Type of reset Description
Factory reset
Restore the device to the factory state except for the audit log. Up to 20
factory resets can be carried out over the product lifetime.
Global reset Complete reset of the device except for the settings and the audit log
Historicals reset
Erase all historical data (Load Profile, Demands, Energy Snapshots and
Energy Trend).
Avg/Min/Max reset Reset the average, min and max data.
Energy reset
Erase all energy measurement accumulators. Up to 240 energy resets can
be carried out over the product lifetime.
Notification reset Erase all notifications (Alarms, Warnings, Errors).
Device Info menu
In this menu it is possible to visualize the main info related to the M4M network analyzer: FW version, FW
CRC, product name and unique serial number.
It is highly recommended to update the firmware to the latest version for security and functionality
reasons. Please check the ABB website and download the latest version of the firmware.
In order to update the FW to the latest version (via Modbus RTU or Modbus TCP/IP) it is necessary to use ABB
Software Ekip Connect 3.
Date/Time menu
During the first commissioning, it is highly recommended to configure the date and time on the network
analyzer (please refer to chapter “6.3.Date and time”).
→ → Unit → Date/Time menu