36 M4M 30 NETWORK ANALYZER USER MANUAL
CT ratio L1 L2 L3 menu
During the first commissioning, it is highly recommended to configure the CT ratio L1, L2, L3 and Neutral
(please refer to chapter “6.5.CT ratio”).
→
→
Installation
→
CT ratio L1 L2 L3
CT ratio Neutral menu
In first commissioning it is mandatory to configure the CT ratio L1, L2, L3 and Neutral (please refer to
chapter “6.5.CT ratio”).
→
→
Installation
→
CT ratio Neutral
VT ratio menu
During the first commissioning it is mandatory to configure the VT ratio (please refer to chapter “6.6.VT ratio”).
→
→
Installation
→
VT ratio
To Next Page
Loading...
