M4M 30 NETWORK ANALYZER USER MANUAL
43
• Time period
The time period is in common for all the max/min demand channels. For this reason, this can
configuration has to be done only once.
The time period represents the timeframe over which the max/min demand values are evaluated and
then stored. When the last interval of an ongoing period has finished, the max and/or min values are
stored, and a new period starts.
Select the time period among one of the following options: day (default value), week, month
→ → Historicals → Max/min demand → Time period
Menu Description
Day (default value)
If day is chosen the starting point for evaluation of max and min
will be now and the ending point will be 00:00 (time period ends
and restarts at 00:00).
Week
If week is chosen, a start day of the period has to be chosen. Options are:
Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, and Sunday.
Month
If month is chosen the starting point will be now and the ending
point will be the first of next month at 00:00 (time period ends
and restarts on the 1st).
The time period and time interval are common for all the max/min demand channels. For this reason, the
configuration of time period and time interval are applied to all the channels.
In order to complete the configuration it is needed to press confirm to related pop-up.
To Next Page
Loading...
