12
Technical Data
• 6-pin connector (connection to the MMIO board)
• Three 3-pin, screw-type, non-detachable terminal blocks that fit
wires up to 1.5 mm
2
(16 AWG).
Specifications
Module Specifications
• Estimated min. lifetime: >
200,000 cycles/relay, at maximum
continuous current operation.
• All materials are UL/CSA-approved.
• When used with an ABB drive, the module complies with EMC
standard EN/IEC 61800-3 (2004) for electromagnetic
compatibility and EN/IEC 61800-5-1 (2005) for safety
requirements.
Relay Outputs
The specifications for the module relay outputs are:
• Max. contact voltage: 30 V DC, 250 V AC
• Max. switching capability: 6 A (24 V DC, resistive load)
1500 VA (230 V AC)
• Max. continuous current: 2 A rms (cos ϕ = 1), 1 A rms (cos ϕ =
0.4)
• Minimum current: 10 mA, 12 V DC
• Contact material: Silver-nickel (AgN)
• Isolation between relay digital outputs, test voltage: 2.5 kV AC,
1 minute
To Next Page
Loading...
