ABB MREL-01 - User Manual

User’s Manual
Output Relay Module
MREL-01
ABB Drives

Summary

Safety

Use of Warnings and Notes

Explains the use of safety instructions and warning symbols in the manual.

Installation

Preparing for Installation

Information on preparing for the installation of the MREL-01 module.

The MREL-01 Module

Describes the MREL-01 module as an interface for connecting three relay outputs.

Module Layout

Illustrates the physical layout and components of the MREL-01 module.

Compatibility

Details the compatibility of MREL-01 with ACS310 and ACS350 drives.

Installing the Module

Step-by-step instructions for mounting the MREL-01 module onto the drive.

Wiring

Guidelines for wiring the MREL-01 module, including cable specifications.

Terminal Designations

Table showing terminal identification and hardware descriptions for relay outputs.

Start-Up

Technical Data

Dimensions

Provides dimensional drawings and measurements of the MREL-01 module.

Enclosure Degree of Protection

Specifies the enclosure rating (IP20) for the module.

Ambient Conditions

Information regarding the environmental conditions for the module's operation.

Connectors

Lists the types of connectors used on the MREL-01 module.

Specifications

Details module specifications, including lifetime, materials, and compliance standards.

Relay Outputs

Specifies technical details for the module's relay outputs, such as voltage, current, and material.

ABB MREL-01 Specifications

General

Brand	ABB
Model	MREL-01
Category	Other
Language	English