ABB NALF Series - Mounting the hand operating mechanism type HE; Instruction of installation and adjustment of switch-disconnector type NAL;NALF;VR with hand operation mechanism HE

Fig. 7
3. To reduce side shake, turn the operating shaft anticlockwise,
see Fig. 55-56.
4. Before mounting on the A-mechanism shaft, set up distance
to ~4-8 mm, see Fig. 57.
18 NAL/NALF – Mounting and operation manual
Fig. 55-57 Mounting of NM motor drive on A-mechanism
Fig. 55
Fig. 56 Fig. 57