Need help?Do you have a question about the ABB vital 1 and is the answer not in the manual?
General| Number of inputs | 1 |
|---|---|
| Mounting | DIN rail |
| Product name | Vital 1 |
| Terminal type | Screw |
| Rated Current | 6 A |
Defines the purpose of the instructions for installation and operation.
Specifies that the document is intended for authorized installation personnel.
Lists assumed knowledge of ABB JOKAB Safety products and machine safety.
Highlights important warnings and notes for safe handling and operation.
Describes the Vital 1 safety module, its function, and key features.
Emphasizes careful reading of the manual and compliance with safety standards.
Details the terminal assignments for the upper and lower connection blocks.
Explains manual and automatic reset options and testing of external contactors.
Describes the two safe relay outputs and the information output functionality.
Provides wiring diagrams for Vital 1 with various safety devices and adapter units.
Illustrates various scenarios of connecting different safety devices to Vital 1.
Shows the maximum number of Eden sensors based on cable length and conductor size.
Details the maximum number of Tina units connectable based on cable and conductor specs.
Presents three connection alternatives for sensors/adaptor units with Vital 1.
Offers general advice for making stable and reliable connections to Vital 1.
Covers mounting the unit and installing cables with correct torque.
Specific safety notes for light beam sensors, including indicator lamp setup.
Instructs on regular testing of safety functions and contacting service for repairs.
Provides steps to verify the safety loop and output relay functionality.
Helps diagnose faults using LED indications and provides corrective actions.
Details the meaning of all LED indicators on the Vital 1 module.
Identifies ABB JOKAB SAFETY as the manufacturer and provides contact address.
Specifies operating voltage, sensor power supply, and power consumption.
Lists switching capacity, minimum load, and contact material for relay outputs.
Covers protection class, ambient temperature, and humidity specifications.
Details connector type, wiring area, S1 connection logic, and mounting.
Lists conformity, EN standards, performance levels, and certifications.
To Next Page
