Need help?Do you have a question about the ABB UniGear Series and is the answer not in the manual?
General| Rated Voltage | Up to 24 kV |
|---|---|
| Rated Current | Up to 4000 A |
| Rated Short-Time Withstand Current | Up to 50 kA |
| Frequency | 50/60 Hz |
| Rated Short-Circuit Breaking Current | Up to 50 kA |
| Rated Lightning Impulse Withstand Voltage | Up to 125 kV |
| Loss of Service Continuity Category | LSC2B |
| Partition Class | PM |
| Type Tested Assembly | IEC 62271-200 |
| Operating Mechanism | Spring-operated, motor-operated |
| Dimensions | Varies depending on configuration. Consult manufacturer's documentation. |
| Weight | Varies depending on configuration. Consult manufacturer's documentation. |
| Protection Degree | Up to IP4X |
Details the purpose, scope, and target audience of the UniGear Digital Engineering Guide.
Identifies design, protection relay, test, and service engineers as the primary users of this guide.
Describes the current and voltage sensors, their types, and technical parameters for UniGear Digital.
Overviews the Relion protection relays compatible with UniGear Digital, their configurations, and functionalities.
Explains the IEC 61850 standard for substation communication, including GOOSE and SMV.
Lists UniGear Digital compatibility across different UniGear switchgear models and ratings.
Details sensor correction factors, setting examples for current and voltage measurements.
Provides examples of network overview diagrams and logic diagrams for panel interconnections.
Guides on configuring GOOSE communication using PCM600 and IET600 tools.
Explains SMV engineering tools, configuration procedures, and time synchronization for process bus.
Covers Ethernet requirements, technology, topologies, traffic management, and network settings.
To Next Page
