Need help?Do you have a question about the ABB NE810 and is the answer not in the manual?
General| Rated Frequency | 50/60 Hz |
|---|---|
| Mounting Type | DIN rail |
| Switching Capacity | 1.6 Gbps |
| Forwarding Rate | 1.19 Mpps |
| Humidity | 5 to 95% (non-condensing) |
| Ports | 8 x 10/100Base-TX |
| Storage Temperature | -40°C to +70°C |
Statement on ownership of copyrights, registered trademarks, and trademarks.
Critical safety warnings regarding laser ports and high ambient temperatures.
Information concerning the GPL license and OpenSSL Toolkit usage.
Steps to connect to the CLI using the console port and required cable.
Information on power input terminals, voltage, and redundant connection.
Details for digital inputs and alarm relay outputs, including pinouts and function.
Explanation of the status LEDs on the unit and their meanings.
Instructions for mounting the unit on a DIN-rail.
Instructions for removing the unit from the DIN-rail.
Spacing guidelines for convection cooling to ensure optimal performance.
Initial setup steps and methods for configuring the unit via web or CLI.
Information regarding the maintenance requirements for the unit.
List of standards and directives the unit complies with, including EMC, Safety, and Marine.
Specific notices related to FCC Part 15.105 and corrosive environments.
Test levels for ESD, transients, surge, and magnetic fields according to EN standards.
Specifies temperature and humidity ranges for operation, storage, and transport.
Details on MTBF, vibration, shock, packaging, weight, and enclosure protection.
List of related ABB user manuals and configuration guides for further information.
Step-by-step guide for performing a factory reset or skipping the process.
To Next Page
