Need help?Do you have a question about the ABB TruONE ATS and is the answer not in the manual?
General| Type | Automatic Transfer Switch |
|---|---|
| Amperage | 30A to 4000A |
| Poles | 2, 3, 4 |
| Standards | IEC 60947-6-1, UL 1008 |
| Enclosure | NEMA 1, 3R, 4, 4X, 12 |
| Rated Voltage | Up to 480 Vac |
| Operation | Automatic, Manual |
| Communication | Modbus RTU, Modbus TCP, Ethernet |
| Mounting | Wall-mounted |
Details hazards and safety precautions for electrical work on the equipment.
Specific instructions for performing dielectric tests, including mechanism removal.
Covers installation procedures for the TruONE ATS and related accessories.
Covers operating procedures for the TruONE ATS, including functional descriptions.
Compares features across different HMI control levels.
Illustrates common applications where TruONE® ATS are used.
Explains the fundamental operational logic and sequences of the ATS.
Details how to select operation modes and lock the transfer switch.
Step-by-step guide for operating the ATS manually using the handle.
Instructions for operating the ATS in automatic mode using the HMI.
Explains the meaning of the LEDs on the HMI for status indication.
Guide for using the Level 2 HMI with DIP-switches.
Guide for using the Level 3 HMI with an LCD screen.
Guide for using the Level 4 HMI with a touch screen.
Guide on using the Ekip Connect software for communication and testing.
Lists and explains the alarms generated by the ATS for different HMI types.
Lists and explains the warnings displayed by the ATS for different HMI types.
Instructions for mounting the TruONE ATS, including hole distances and labeling.
Provides wiring instructions for the automatic transfer switch.
Provides wiring instructions for cable lugs on OX_30-800 models.
Wiring instructions for busbar connections and cable lugs on OX_800U-1600 models.
Instructions for mounting the operating handle and HMI unit.
To Next Page
