PROJECT INSTANCES
Two instances are available within the NEXUS-3 Series device. This provides the capability to host up to
two projects within the target. Each instance runs its own Aspect Control Engine allowing service to be
performed on separate instances. Within Instance 1 and Instance 2, the same options exist for the
following:
• Calendar Configuration
• Users and Groups
• Mobile
• Instance Services
• Project Source
• Project Removal
• Aspect Control Engine Logs
• License Item Status
• Project Thread Status
CALENDAR CONFIGURATION
The Calendar Configuration area is used to configure iCalendar integration variables of the NEXUS-3
Series device. Within this section there are two pages:
• Calendar File
• Calendar User
Calendar File
Calendar File can be used to browse and modify what calendars have been previously published to the
instance, as well as allow users to manually upload iCalendar files (files with .ics extensions) to the device.
• To upload a saved calendar file, simply select the Browse/Choose File button and locate the
iCalendar file on your computer. Once located, click the Upload button.
• To delete a previously published calendar, place a check mark next to the corresponding file and
select the Delete button.
To Next Page
Loading...
