ABB NEXUS-3 Series - Communication Setup Options; Out of Service Manager (OSS); BACnet Network Settings

NEXUS-3 Series | Software Configuration
©ABB 2021 All Rights Reserved.
Subject to change without notice
WWW.CYLON.COM
22
MAN0151 Rev 5
COMMUNICATION SETUP
The Communication Setup page provides administrators the ability to configure manual Out of Service
entries, SDP Network Properties, BACnet IP Router, BBMD and Time Synchronization settings.
OUT OF SERVICE MANAGER (OSS)
The Out Of Service Manager (OSS) provides a single location that allows administrators to manually mark
devices out of service using the Manual OOS check boxes.
BACNET SETTINGS
The BACnet Configuration area allows configuration of read/write retries, port configuration, and router
settings for BACnet/IP.