ABB NEXUS-3 Series - BBMD Settings Configuration; Modbus Network Properties; Time Synchronization Settings

NEXUS-3 Series | Software Configuration
©ABB 2021 All Rights Reserved.
Subject to change without notice
WWW.CYLON.COM
23
MAN0151 Rev 5
BBMD SETTINGS
The BBMD settings area is used to configure the BACnet/IP Broadcast Management Device (BBMD) table
setup for BACnet networks.
MODBUS NETWORK PROPERTIES
The Modbus Network Properties page is used to set the configuration for Modbus communications.
TIME SYNC SETTINGS
The Time Sync Settings area provides the ability to configure BACnet network time synchronizations.