ABB NEXUS-3 Series - Web Server Configuration; Image Proxy Configuration

NEXUS-3 Series | Software Configuration
©ABB 2021 All Rights Reserved.
Subject to change without notice
WWW.CYLON.COM
28
MAN0151 Rev 5
WEB SERVER CONFIGURATION
The Web Server Configuration area is used to set a label for the login screen and change port settings for
the following:
• Aspect Control Panel - defaults to port 80 (HTTP)
• Aspect Control Engine - defaults to port 7226
• Simple Mobile Web - defaults to port 8080
IMAGE PROXY CONFIGURATION
The Image Proxy Configuration page permits users to enable to disable image proxy, allowing Aspect to
access external sites retrieve graphics.