ABB PM581 User Manual

________________________________________________________________________________________________________
AC500-eCo - 1 - Hardware Introduction
Hardware Introduction
to
AC500-eCo

ABB PM581 Specifications

General

Real-time clock	Yes
Communication interfaces	Ethernet, RS-232, RS-485, USB
Power Supply	24 V DC
Operating temperature	-25°C to +60°C
Mounting	DIN rail
Protection Rating	IP20
Product name	ABB PM581
Processor	32-bit CPU
Ethernet	10/100 Mbit/s, auto negotiation
Ethernet Ports	2
RS-232	1
RS-485	1
Serial Ports	RS-232, RS-485
Input Channels	Configurable
Output Channels	Configurable
Display	No display

Summary

2. AC500-eCo Hardware Descriptions

2.1 CPU Overview

Describes the CPU PM554 and PM564 as the central unit with onboard digital/analog I/O.

2.1.1 CPU Components

2.1.3 The CPU Onboard I/Os

2.1.4 Communication Interfaces

Describes COM1, COM2, and I/O Bus communication interfaces for the AC500 CPU.

2.1.6 Mode Selection Switch RUN/STOP

2.2 S500-eCo I/O Modules Overview

3. Hardware Installation and Wiring

ATTENTION Preventing Electrostatic Discharge

Provides guidelines for preventing electrostatic discharge damage to equipment.

3.1 Hardware Mounting

Details methods for mounting AC500 hardware, including DIN rail and wall mounting.

3.1.1 DIN Rail Mounting/ Re-Mounting

Step-by-step instructions for mounting AC500 CPU and I/O modules on a DIN rail.

3.1.2 Wall Mounting

3.2 Wiring

Provides general wiring cautions and specific instructions for power supply wiring.

3.2.1 Power Supply Wiring

Details connecting 24V DC and 100-240V AC power supplies to AC500 CPUs.

3.2.2 Terminal Block

4. Appendix

4.1 Technical Data

4.3 Guidelines of Safety

Provides important user information and safety guidelines for AC500-eCo PLC.