ABB PM590 User Manual

________________________________________________________________________________________________________
AC500-eCo - 1 - Hardware Introduction
Hardware Introduction
to
AC500-eCo

ABB PM590 Specifications

General

Brand	ABB
Model	PM590
Category	Controller
Language	English

Summary

1. Introduction

2. AC500-eCo Hardware Descriptions

2.1 CPU Overview

Describes the central unit of the AC500 system with onboard I/Os.

2.1.1 CPU components

2.1.3 The CPU onboard I/Os

2.1.4 Communication Interfaces

Details COM1, COM2, and I/O Bus interfaces for AC500 CPUs.

2.1.6 Mode Selection Switch RUN/STOP

2.2 S500-eCo I/O Modules Overview

2.2.1 I/O Unit components

Details the components of an S500-eCo I/O module.

3. Hardware Installation and Wiring

3.1 Hardware Mounting

Details methods for physically mounting AC500 hardware components.

3.1.2 Wall Mounting

3.2 Wiring

Wiring cautions

Lists important cautions for wiring AC500 systems.

3.2.1 Power Supply Wiring

Explains how to wire the 24V DC and 100-240V AC power supply.

4. Appendix

4.1 Technical Data

4.3 Guidelines of Safety

Important user information

Provides important user information regarding safety and liability.

Notes in this manual

Explains the meaning of symbols used in the manual for safety.

Environment and Enclosure Information

Environment and Enclosure

Safety technical instructions

General

General instructions for safe installation and functioning of devices.

Qualified personnel

Emphasizes the need for qualified personnel for safe operation.

Use as directed

Risk reduction instructions

General Operational and Environmental Safety

Safety guidelines for housing and ventilation of the system.

Electrical Safety and Wiring Practices

Safety rules for earthing, power connection, and wiring practices.

Additional notes

Avoidance of electrostatic charging